To connect to your Vetta internet service, you will need to enter authentication details into your modem or router, these are available in your client portal. The format and settings of these are:
ADSL Settings
Username: username@vetta.net.nz
Password: password
PPP Protocol: PPPoA
Encapsulation: VC-MUX
VPI/VCI: 0/100
Please ensure that any “Service Name” or similar field is left blank.
IPv4: Static IPv4 by default.
IPv6: Dynamic /36 subnet by default. Static subnet available on request.
VDSL Settings
Username: username@vetta.net.nz
Password: password
PPP Protocol: PPPoE
VPI/VCI: 0/110
VLAN: 10
Please ensure that any “Service Name” or similar field is left blank.
IPv4: Static IPv4 by default.
IPv6: Dynamic /36 subnet by default. Static subnet available on request.
UFB Settings
PPPoE Configuration
Connection type: PPPoE
Username: [email protected] (or any non-blank username)
Password: vetta (or any non-blank password)
PPP Protocol: PPPoE
VLAN: Untagged/None
Please ensure that any “Service Name” or similar field is left blank.
IPv4: Static IPv4 by default.
IPv6: Dynamic /56 subnet by default delivered via DHCPv6-PD over your PPPoE dialer. Static subnet available on request.
DHCP Configuration
Connection type: DHCP or IPoE
VLAN: Untagged/None
IPv4: Static IPv4 by default.
IPv6: Dynamic /56 subnet by default delivered via DHCPv6-PD. Static subnet available on request.
RBI Settings
A Huawei B315s, B525s or B818 must be used with the Vetta RBI SIM card inserted.
APN: rbi.vetta.net.nz
(Note the APN should be detected automatically and shouldn’t require being entered manually)
Username: blank
Password: blank
IPv4: Static IPv4 by default.
IPv6: Not available.
Mobile Broadband Settings
A Vetta MBB/M2M SIM card must be inserted into the device.
APN: vettambb
Username: blank
Password: blank
IPv4: Dynamic Carrier-NAT by default. Static Public IPv4 available on request.
IPv6: Not available.













Comments are closed.